Skip to content

AYANEO Slide

Features

Feature                 Notes
Storage SteamFork can be run from a USB Drive or installed directly to the internal NVME.
Wifi Can be turned on in Steam OS under Main Menu > Network Settings.
Bluetooth Supports bluetooth audio and controllers.
Fan Controlled by system firmware.
TDP Limit Can be set globally, per system or per game. Requires the SimpleDeckyTDP plugin.
Rumble Enables the device rumble motor in emulators that support it.
RGB Disabled on startup. Requires the HueSync plugin for additional RGB control.

Notes

Installation

Download the latest AMD64 version of SteamFork from the button below and follow the instructions listed on the Install page.

Latest Version Latest Version

Known Issues

  • An unknown issue exists that causes the device to reboot unexpectedly. There is no notification or panic log.
  • When Modern Standby is enabled, the power button does not send events to the OS. Sleep works with Modern Standby + Si02 when selected from the Steam interface.

Booting from an external drive (USB or SD Card)

To boot SteamFork from an external drive, hold LC+Volume Up and press the Power button, continue holding LC+Volume Up until the Ayaneo logo appears. Select the storage device with SteamFork from the boot menu using the Ayaneo button, and then press volume up to boot the distribution.