Skip to content

AYANEO Air 1S 8840U

Features

Feature Notes
Storage SteamFork can be run from a USB Drive or installed directly to the internal NVME.
Wifi Can be turned on in Steam OS under Main Menu > Network Settings.
Bluetooth Supports bluetooth audio and controllers.
Fan Controlled by system firmware.
TDP Limit Can be set globally, per system or per game. Requires the SimpleDeckyTDP plugin.
Rumble Enables the device rumble motor in emulators that support it.
RGB Disabled on startup. Requires the HueSync plugin for additional RGB control.

Function Buttons

Button Function
Aya Guide (Steam Menu)
Guide + A (Quick Access Menu)
LC L4
RC R4

Notes

Known Issues

  • Audio and input events may not work consistently with fastboot enabled. It is recommended to turn fastboot off in the BIOS.
  • Sleep does not function properly, and only blanks the screen.
  • Hibernate does not function when configured, and freezes the device.
  • Dualsense controllers may not properly pair with bluetooth unless Bluez is downgraded to 5.68 or below.

Installation

Download the latest AMD64 version of SteamFork from the button below and follow the instructions listed on the Install page.

Latest Version Latest Version

Booting from an external drive (USB or SD Card)

To boot SteamFork from an external drive, hold LC + Volume Up and press Power , continue holding LC + Volume Up until the Ayaneo logo appears. Select the storage device with SteamFork from the boot menu using the Aya button, and then press Volume Up to boot the distribution.