AYANEO Air 1S (AMD 8840U)¶
Features¶
| Feature | Notes |
|---|---|
| SteamFork can be run from a USB Drive or installed directly to the internal NVME. | |
Can be turned on in Steam OS under Main Menu > Network Settings. |
|
| Supports bluetooth audio and controllers. | |
| Controlled by system firmware. | |
| Can be set globally, per system or per game. Requires the SimpleDeckyTDP plugin. | |
| Enables the device rumble motor in software that supports it. | |
| Disabled on startup. Requires the HueSync plugin for additional RGB control. |
Function Buttons¶
| Button | Function |
|---|---|
| Aya | Guide Steam Menu) |
Quick Access Menu) |
|
| LC | L4 |
| RC | R4 |
Notes¶
Known Issues¶
- Audio and input events may not work consistently with fastboot enabled. It is recommended to turn fastboot off in the BIOS.
- Hibernate does not function when configured, and freezes the device.
- Dualsense controllers may not properly pair with bluetooth unless Bluez is downgraded to 5.68 or below.
- There is a popping sound when the speakers initialize after powering the device on or after they are turned on from from powering down. This can be resolved at the expense of a ~1W additional power draw when the speakers aren't otherwise in use. Writing this in terminal will resolve the popping:
sudo steamfork-set-setting audio.powersave.disabled 1
Installation¶
Download the latest AMD64 version of SteamFork from the button below and follow the instructions listed on the Install page.
Booting from an external drive (USB or SD Card)¶
To boot SteamFork from an external drive, hold